OMAX 2652 Capabilities
Quick turnaround for the general machine shop: Precision machining of small to medium-sized parts. The Model 2652 JetMachining Center cuts complex flat parts out of most materials including metal, plastic, glass, ceramics and composites directly from a CAD drawing or .DXF file. It is ideal for short-run part production, just-in-time manufacturing, tooling and prototype part development. No tool changes or complex fixturing reduces set-up times by at least 50%.
Machine Dimensions
Footprint 139" x 67" (3531 mm x 1702 mm)
Weight 3320 lb (1505 kg)
Height 77" (1955 mm)
Operating Weight 9150 lb (4150 kg) (with water in tank)
Work Envelope
X-Y Travel 52" x 26" (1321 mm x 660 mm)
Table Size 69"x 30" (1753 mm x 762 mm)
(Optional accessories may reduce travel. Contact OMAX for information.)
Computer Control System
Hardware Personal computer
Control Software Integrated CAD/CAM system directly uses .DXF files
Drive Description
Closed loop, digital drives
Brushless servo motors
Pre-loaded ball screws, recirculating balls
Linear bearings with hardened, precision ground ways
Cantilever Y-Axis on bridge X-Axis
Accuracy of Motion at 70° F
Ball Bar Circularity (Over 12")
At Max. Traverse Velocity ±0.003" (0.08 mm)
Repeatability ±0.0013" (0.033 mm)
Squareness 0.0013" per ft (0.11 mm/m)
Straightness 0.0017" per ft (0.14 mm/m)
Backlash 0.0007" max. (0.018 mm)
(Specifications per National Machine Tool Builders Association standard)
Speed
200 inches per minute standard (5080 mm/min)
|
